TJ v-8 mounts

[hohner0006]

Does Bulltear (or anyone else) offer motor mounts to put an AMC 401 in a '98 TJ that originally had an in-line 6? I'm transplanting my 401-t400-d20 from my cj into it after I swap out the axles to a d44/9".

[Mudrat]

I've read about other similar swaps, but don't know if there is a 'kit' or they just fabbed the mounts themselves. It's not really that hard if you have the time and a welder.

Ask shawnsc25 here on the board, he's got a 401 in his YJ.

'Rat

[hohner0006]

I've already considered making my own mounts but thought I'd try the "easy" way first! I'll PM shawnsc25 on it. Thanks!

[tufcj]

I'm not sure what's different between the YJ and TJ frames. M.O.R.E. makes V-8 mounts for the YJ. I run a set of their "bombproof" mounts in my CJ (they really are).

You might call them to find out. http://www.mountainoffroad.com/

Bob
tufcj

[hohner0006]

Thanks, I will call them Monday morning.

[RickyR]

I tried looking until my eyes bled.
The only thing I could do is belly up to the welder and go for it..





The CJ was a little rough, so everything is going into the LJ (401, 727, D300 with 4:1, D60's and 40's)
4 link front and rear with coilovers. I will definitely be broken mentally and monitarily.

Ricky

[RickyR]

few more pics:








No suspension yet, just setting ride height for the build.

Ricky