Results 1 to 4 of 4

Thread: ported vacuum switch (cto)

  1. #1

    Join Date
    Feb 2006
    Location
    pine grove, pa
    Posts
    36

    ported vacuum switch (cto)

    While installing the 401 In my J10 I decided to replace all the censors and such and ran into a problem locating a ported vacuum switch or as the shop manual calls it a CTO (coolant temperature override). This is the 3 port vacuum switch that sends manifold vacuum under 160 degrees and then ported vacuum over 160 degrees to the distributor. There can also be a 2 port EGR/CTO switch that controls the EGR, not to confuse them. The "Standard" number is PVS10 which is discontinued for the AMC's. The only number I found on my old switch was Q23. Did a little digging in the Standard book and found one for a Ford application (PVS20) or (Duralast E941 switch interruptor) with the same specs (thread size and heat range). When it came in it also had Q23 designation on it. They should update the books for application. Just thought it might be of some interest to others.

  2. #2
    Thank you from BT Ultra tech
    Join Date
    Oct 2006
    Location
    KEARNY, NEW JERSEY
    Posts
    428

    PVS 10

    I JUST BOUGHT A PVS 10 AT MY PARTS STORE.
    SPEED COSTS MONEY: HOW FAST DO YOU WANT TO GO?

  3. #3

    Join Date
    Feb 2006
    Location
    pine grove, pa
    Posts
    36
    is there a Q23 stamped on it? My pvs10 and pvs20 were identical. What was your parts store and did they have a listing for the PVS10 or old stock?

  4. #4
    Helpfull BT forum member Junior wrench of the Forum
    Join Date
    Mar 2004
    Location
    Fort Wayne, Indiana
    Posts
    99
    Quote Originally Posted by jarcher401 View Post
    There can also be a 2 port EGR/CTO switch that controls the EGR
    Sorry for digging up an old thread, but I found this posting while searching for CTOs.
    I am seeking one of these 2 port CTO switches for my EGR.
    Any ideas of what the part number for that CTO might be or what I should ask for at the McParts store?
    Bryan Smith
    Fort Wayne, Indiana
    2005 Jeep Grand Cherokee Limited
    - 5.7 HEMI powered
    1982 Jeep J10
    - Progress toward road-worthiness is being made!
    1981 Jeep J20
    - Commercial flat bed - Long term Project: RUST! Long term project (RUST!)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad