AMC V8 Serpentine system with AC support

[jeepsr4ever]

This system currently only replaces the alternator bracket. The AC bracket uses a 7/16 stud on the block for the lower part of the bracket kit does not include this stud however they are cheap and easy to find.

[sethdowd]

Ok, thanks.

[sethdowd]

Just purchased one. I'm excited to get this engine install wrapped up. Which belt should I purchase for this? Also, what pulley removers do I need for the saginaw (circa 7eight) and alternator? (what size that is) Had to write out eight to get rid of double flipoff.

[Mudrat]

Hey MC, do you support the non-AC to full AC serp kit? Running the non-AC kit now - and runs well, but want on-board air compressor.

Your favorite 'Rat :-)

[jeepsr4ever]

Absolutely Pat! You will need some spacers, a new alty bracket, a new York or Sanden clutch kit and a factory bracket for york or sanden. We will be making factory style brackets soon.

[sethdowd]

Should I be using spacers behind my York bracket? All of the other pulleys line up fine except for the York. It's like a 1/2" too far back. There aren't instructions so I was unsure. Thanks.

[jeepsr4ever]

Yes the spacers are for the York.

[Mudrat]

MC, any plans to have a PS bracket that moves it down or away from the Dizzy 1-2 inches? Getting those two wires through there is a bit tricky and they rub the pump housing.

'Rat

[fifesjeep]

Freaking Beautiful mang!!!

[fifesjeep]

MC, any plans to have a PS bracket that moves it down or away from the Dizzy 1-2 inches? Getting those two wires through there is a bit tricky and they rub the pump housing.

'Rat

Lets see a pic Pat?