what is the o.d. of the oil filler tube for a 360 and is it different for an edelbrock intake
what is the o.d. of the oil filler tube for a 360 and is it different for an edelbrock intake
Not sure what the exact OD is. I have run into a couple of Edelbrock manifolds where the stock tube fits loosely due to casting tolerances. One was the R4B on my AMX. I bought the stainless tube/aluminum cap from Bulltear, and had to send the tube back and have MC re-machine it with a little larger OD. Usually a film of RTV will hold it and keep it from leaking.
Bob
tufcj
1969 AMX
1967 Rambler Rogue
If you need a tool and don't buy it...
you'll eventually pay for it...
and not have it.
Henry Ford
The OD of the press fit portion is 1.483-1.4855
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689