Last edited by fifesjeep; 11-14-2010 at 01:03 PM.
Sweet sheetmetal intake? Hey check this out if you want some free cad/cam http://www.cncsimple.com/
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
You got it man... I think the hardest part will be getting the runners equal and tied into the plenum smoothly. What do you think? Nice link... have you tried it? Looks like I'll have something to play with... lol. thanks man!!!
Equal length is easy just bandsaw them to length and weld. I was thinking at one point about an extrusion tool that would do 2 runners at a time so you could just weld up the outside but their isnt much of a demand for those. I havent screwed around with it we have a 25K system for cad/cam.
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Which motor is this effort for? AMC or Bowtie?
Larry The Old Rugged Crosser
in a Old Rugged Cross'en 72 CJ-5
------------------------------------------
You are invited to view my rebuild of The Old Rugged Crosser --CJ-5 at:
http://www.jeepforum.com/forum/f8/rebuilding-old-rugged-crosser-cj5-1180801/
------------------------------------------
"He that is kind is free, though he is a slave; he that is evil is a slave, though he be a king." - St. Augustine
Jeepsr4ever.... I'm thinking thin wall SS exhaust tube formed at the bottom... the top will be cut and welded and then milled flat. I'm thinking 3/8" plate for the plenum because I can always toss on an aluminum spacer. The flanges will be cut out of 3/8" plate as well. The valley pan should be interesting... I'll have to fit everything up first before I decide how I want to do that... Also, with these long runners I am thinking about welding in some bosses for fuel injection just incase I decide to go that route in the future ;)...
Old Rugged Crosser.... This will be for the AMC V8's (72-91)... I'm still debating whether or not to have the center bolt holes cut so that the early heads will work with it...
I wouldnt use stainless I would stick to aluminum.
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
With all the after market intake manifolds around and available why? What do you hope to gain with all the time spent on this single effort?
Larry The Old Rugged Crosser
in a Old Rugged Cross'en 72 CJ-5
------------------------------------------
You are invited to view my rebuild of The Old Rugged Crosser --CJ-5 at:
http://www.jeepforum.com/forum/f8/rebuilding-old-rugged-crosser-cj5-1180801/
------------------------------------------
"He that is kind is free, though he is a slave; he that is evil is a slave, though he be a king." - St. Augustine