m11 yoke help

[shawnsc25]

im looking for info on Interchangeability....the m11 I have is a 28 spline and im pritty sure a t10 yoke will fit but are there others,for instance an amc 20 has a 28 spline yoke and is alot easyer to find

I dont have any yokes on hand to compare or try out so any help is very much needed

[tufcj]

I'm no expert, but I think the M11-A and the T10 were fine spline, could be interchangable. The M-11B and M-12 were coarse spline. I've heard that a Ford C-4/T-4 will work IF you have the OD machined down.

Bob
tufcj