Results 1 to 6 of 6

Thread: Need t150 bellhousing measurements

  1. #1
    Bulltear forum member Cook
    Join Date
    Feb 2008
    Location
    Bremerton, WA
    Posts
    14

    Need t150 bellhousing measurements

    Does anyone have a t150 bellhousing handy that can take some measurements for me?

    I need to make a pivot ball pedestal as mine is missing.

    I need the length of the pedestal from tip to where the bellhousing surface that mounts to the trans, the diameter of the pedestal and the depth of of the groove where the ball sits.

    I need this in order to get my cj5 back on the road.

    Any help would be greatly appreciated.

  2. #2
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,864
    Got a couple in the shed. I can take the measurements or I'd sell you one for $75 plus shipping.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford

  3. #3
    Bulltear forum member Cook
    Join Date
    Feb 2008
    Location
    Bremerton, WA
    Posts
    14
    Quote Originally Posted by tufcj View Post
    Got a couple in the shed. I can take the measurements or I'd sell you one for $75 plus shipping.

    Bob
    tufcj
    Measurements would be great as it has already been modified for the ih t19 bolt pattern

  4. #4
    Bulltear forum member Cook
    Join Date
    Feb 2008
    Location
    Bremerton, WA
    Posts
    14
    ttt

  5. #5
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,864
    Sorry about the delay. Been on call at work and putting in some long hours.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford

  6. #6
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,864
    Quote Originally Posted by 65postgs View Post
    I need the length of the pedestal from tip to where the bellhousing surface that mounts to the trans
    I measure 1.495" at the tallest. It varies about .020" because of the rough casting.


    Quote Originally Posted by 65postgs View Post
    the diameter of the pedestal
    It measures .835" at the top. .920" at the bottom. The casting is tapered.

    Quote Originally Posted by 65postgs View Post
    the depth of of the groove where the ball sits.
    This one is approximate, I get .275". It's tough with the rough top of the casting and the curved bottom of the hole.

    The ball is .625" in diameter.

    Hope this helps.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad