Results 1 to 3 of 3

Thread: 258 to AMC 360 swap - cooling requirements

  1. #1
    Bulltear forum member New to the forum
    Join Date
    Apr 2012
    Location
    Gig Harbor, WA
    Posts
    4

    258 to AMC 360 swap - cooling requirements

    Hi guys, please help me out here. I'm swapping out my 258 for a AMC 360 in my '82 CJ5. I've read numerous jeep forum topics that say the swap will require a cooling upgrade from 2 to 3 core radiator larger 7 blade fan and shroud. I was all set to order a new 3 core online, but as I was removing my cooling system I took a glance inside the cap and it appears to be a 3 core. The fan was also a 7 blade clutch fan with the original shroud. So now I'm thinking I could just keep the original set-up and have the radiator flushed and pressure tested...? Anyone have experience with running a 360 with what appears to be a 258 heavy duty 3 core cooling package? The 360 has been built stock with the only upgrade of an RV cam, so it's not a HP monster. Thanks!
    Name:  Core_.jpg
Views: 6154
Size:  95.0 KBName:  Radiator_.jpg
Views: 6211
Size:  79.1 KBName:  7 Blade Fan_.jpg
Views: 6062
Size:  81.6 KB

  2. #2
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,864
    You will definitely need to have that radiator professionally cleaned, but it is a 3 core, so try it. It's cheaper than replacing it. The fan should work too. The 6 cyl shroud won't work. The engine/water pump position off sets it differently than the V-8. The 6 and 8 shrouds are different.

    What are you doing for motor mounts? The V-8 passenger side frame side mount is different than the 6. You'll also need the CJ V-8 specific block side mounts. I like the M.O.R.E. bombproof mounts, ran them for years without problems.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford

  3. #3
    Bulltear forum member New to the forum
    Join Date
    Apr 2012
    Location
    Gig Harbor, WA
    Posts
    4
    Thanks Bob! That's exactly what I needed to know. I'll put a new shroud on my shopping list and I really hope the radiator shop can pull off a miracle cleaning on this thing.

    As for motor mounts, I just recieved the M.O.R.E. Bombproof mounts yesterday from Qaudratec. Those things are really meaty, should easily hold a 360 firmly in place.

    Larry
    82cj5
    82 CJ5, 258 w/ Weber & DUI, Borla Headers, T177, D300, D30(f) AMC(r), 3" lift w/ SRS, HD tie rod/drag link & shackles and on and on... Semper Fi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad