Results 1 to 3 of 3

Thread: T19 Borg Warner 4 speed ID

  1. #1
    Thank you from BT Junior wrench of the Forum
    Join Date
    Mar 2008
    Location
    connecticut manic mechanic
    Posts
    105

    T19 Borg Warner 4 speed ID

    Going through a T19 Close Ratio speed Can Anyone Provide info what it Came From ? Casting Number Side of Case 13-09-065-905 , And What I Believe is a Build Date Under the Casting Number m.5.78 ! It Has 2 SteelShift Forks in Cover with Reverse Fork Side of Case ! Other Numbers Found Stamped in Top of Case are D169 ! Just Want to Know if This was Originally in a Ford Jeep or International ! Thanks in Advance !
    an amc was my first car and so will also be my last car/jeep

  2. #2
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,864
    You're sure it's a T-19? The T-19 had a synchronized 1st gear. That leaves Jeep out, they didn't use a T-19. If it has mounting ears on the case, then it's a Ford unit. The International unit bolted on from inside the bellhousing, and didn't have the ears.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford

  3. #3
    Thank you from BT Junior wrench of the Forum
    Join Date
    Mar 2008
    Location
    connecticut manic mechanic
    Posts
    105

    T19

    Definetly a T19 it has dual pto ports and top cover has T19 cast into it , mounting studs go through inside of bellhousing and no ears ! So Guess it Started life in an International ! Thanks For the Info !
    an amc was my first car and so will also be my last car/jeep

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad