With every gantry kit and turnkey table we send out a thorough support disk that covers everything from installation of software to possible issues during installation. This disk has step by step instructions for all applications however our online tutorial will cover exactly what you need for plasma cutting. It is important to note this as the disk will outline everything for the electronics much of it has already be refined into simple instructions. We highly recommend reading and following our instructional FIRST and if you have an issue to please read the info on the support disk. This helps to get you up to speed and 99% of the time will solve any simple setup issues you may have. Our network is HUGE and probably the biggest support network in the industry. Here is the network priority and info
www.Bulltear.com/forum (first line of online support for all things electronic, software and hardware related)
Bulltear industries inc 1-651-433-3689 (phone support)
http://forum.sheetcam.com/ (Sheetcam online support forum)
http://www.machsupport.com/forum/index.php (Mach 3 online support forum)
http://bobcadafterdark.com/ (for those using Bobcad software, online support)
http://www.inkscapeforum.com/ (for those using Inscape software, online support)