Warning: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in ..../includes/class_bbcode.php on line 2968 Gantry upgrades for customers that bought from 9-01-2011 to 9-01-2013 (one month left)
Gantry upgrades for customers that bought from 9-01-2011 to 9-01-2013 (one month left)
For those that have a gantry kit or machine bought in those months that want to upgrade to the new dual rail gantry (capable of 400ipm+ cutting speeds) the clock is ticking. We are offering a gantry exchange plus a fee for shipping and updates. We will raise the price of this upgrade feature at the end of March.
Upgrades
1. New faster/lighter Z axis (Z axis exchange) (with new MAG LOK plate)
2. Dual rail Y axis with increased rigidity (HSP high speed plasma capable)
3. Free shipping back to you
What you need to do
1. Remove your Y axis motor assembly
2. Remove your cable carrier and torch MAG-LOK plate, Z axis motor with coupler, motor mount spacers and bolts
3. Take your A axis cable out from the gantry
4. Remove gusset support bolts from gantry
5. Remove the gantry from your machine and crate up and send back to us
Bulltear
24543 Olinda trail
Scandia MN 55073
Upgrade pricing
4x4/4x8/4x10/4x12 $1188 (end of march price $2600 plus shipping)
5x5/5x8/5x10/5x12 $1533 (end of march price $2900 plus shipping)
This includes a new gantry and a new Z axis assembled and ready to install upon arrival. Turn around time is subject to change with our schedule.
Last edited by jeepsr4ever; 02-18-2014 at 02:53 PM.
Helpfull BT forum member
Junior wrench of the Forum
Join Date
Sep 2012
Location
Coarsegold, CA
Posts
86
Would it be possible to get some detailed photos of the changes? I already ordered the new Ethercut system from CandCNC, but I just saw the gantry upgrades.
Virtually identicle to this.
Lightened Z axis (gun drilled shafts, New style slide, New microswitch and wiring, 5-1 ratio (20% speed increase))
Lightened MAG-LOK plate
Dual rail gantry
That gantry system is almost 5 years old. Young by machines standard ...but their are no upgrades for that gantry. You would be better served selling that machine and building from a Star-Lab gantry kit or buying a new table. The pan is so far from the top rail the Z axis would need 13"s of travel to reach it. All current upgrades are for machines bought from late 2011 - present
Im interested in an upgrade if it's still available. I didnt even know it was an option till i stumbled upon this. I just ordered all new ethercut system from candcnc.