Results 1 to 4 of 4

Thread: 360 V8 WITH JAGUAR TH400

  1. #1
    Bulltear forum member New to the forum
    Join Date
    Feb 2017
    Location
    London
    Posts
    2

    Question 360 V8 WITH JAGUAR TH400

    Hi People,

    I am a big fan of the AMC V8 and have a 360 in a hot rod, I swapped the old th400 as it was out of a four wheel drive with a transfer case on the back for a jaguar th400 so that I could run a jag prop with jag irs I have notice that there is a slight off set in alignment/twist of the engine and box so that the oil pan is not quite horizontal with the chassis is there some sort of conversion that will level the engine and trans to avoid oil starvation to the trans in a long corner or is this normal for the trans to be offset.
    Chris.

  2. #2
    Thank you from BT ULTIMUS MAXIMUS STATUS jeepsr4ever's Avatar
    Join Date
    Dec 2002
    Location
    Living in reality can work if your realistic
    Posts
    10,038
    I do not know of a simple conversion you can do other than run a chevy TH400 with an Advanced adaptors Chevy TH400 to AMC bellhousing adaptor.

    Featuring
    www.Plasmaland.com for CNC plasma machines
    1-651-433-3689 TOLL FREE 1-855-433-3689

  3. #3
    Bulltear forum member New to the forum
    Join Date
    Feb 2017
    Location
    London
    Posts
    2
    cheers will look into it

  4. #4
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,792
    I'm pretty sure you could put the Jag tail shaft/housing in the AMC case. It would require total disassembly of both transmissions.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford


    Vote for BULLTEAR on top4x4sites.com ===> VOTE BUTTON

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad