Warning: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in ..../includes/class_bbcode.php on line 2968
1-1/4" plate need to cut in half Powermax 85
Bulltear Ad
Results 1 to 5 of 5

Thread: 1-1/4" plate need to cut in half Powermax 85

  1. #1
    Bulltear forum member New to the forum
    Join Date
    Aug 2016
    Location
    Florida
    Posts
    9

    Question 1-1/16" plate need to cut in half Powermax 85

    Hey guys,

    Never tackled this yet....Need to know how to run from one edge to another in a straight line. Says edge start for this thick of material I'm guessing DTHC off? and should I draw the length plus some in bobcad then convert into sheetcam? any help would be appreciated!
    Last edited by szextreme; 04-12-2017 at 05:46 AM.

  2. #2
    Thank you from BT ULTIMUS MAXIMUS STATUS jeepsr4ever's Avatar
    Join Date
    Dec 2002
    Location
    Living in reality can work if your realistic
    Posts
    10,045
    Edge starting is easy to do you just move your part or parts using the 4 way arrow in sheetcam. Then pick the egde of the plate as a zero point in either X or Y depending on how your edge starting. To chain them all together so you don't have but one edge start pierce you must first have no inside geometry. Then when you do an operation use the chain length option and put a number like 100 and see where it lays out on your parts. Chaining is a very nice feature for flame (oxy fuel) cutting.

    Featuring
    www.Plasmaland.com for CNC plasma machines
    1-651-433-3689 TOLL FREE 1-855-433-3689

  3. #3
    Bulltear forum member New to the forum
    Join Date
    Aug 2016
    Location
    Florida
    Posts
    9
    Figured since I posted on another forum the results I might as well show here as well.Good cut quality
    Name:  20170412_185442 (1).jpg
Views: 157
Size:  101.3 KB

  4. #4
    Bulltear forum member New to the forum
    Join Date
    Aug 2016
    Location
    Florida
    Posts
    9
    Name:  Plasma2.jpg
Views: 158
Size:  92.3 KB

  5. #5
    Thank you from BT ULTIMUS MAXIMUS STATUS jeepsr4ever's Avatar
    Join Date
    Dec 2002
    Location
    Living in reality can work if your realistic
    Posts
    10,045
    Cuts look GREAT!

    Featuring
    www.Plasmaland.com for CNC plasma machines
    1-651-433-3689 TOLL FREE 1-855-433-3689

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad