Results 1 to 2 of 2

Thread: BullTear Oil filter relocation end plate AMC V8 Help?

  1. #1
    Bulltear forum member New to the forum
    Join Date
    Nov 2017

    BullTear Oil filter relocation end plate AMC V8 Help?

    I recently purchased the filter relocation end plate. While trying to install the oil pressure bypass spring and plunger, for some reason the plunger does not fit. I tried 2 different plungers, but both do not fit. Is there a different size plunger that this adapter uses or does it use the stock plunger. Any help would greatly be appreciated. Thank you in advance.
    Attached Images Attached Images  

  2. #2
    Thank you from BT ULTIMUS MAXIMUS STATUS jeepsr4ever's Avatar
    Join Date
    Dec 2002
    Living in reality can work if your realistic
    Give it a little push it will drop it. There may be a tiny burr holding it up. The reamer is the last thing to enter the hole so if it kicked off a but as it left it would keep the plunger from going it but it should go in fine after the initial push.

    Featuring for CNC plasma machines
    1-651-433-3689 TOLL FREE 1-855-433-3689

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Bulltear Ad