Hey gang,
I have run into a bit of a snag trying to reassemble my steering shaft. I have the stock steering shaft assembly; BUT at the coupling to the new AGR power steering unit where the shaft inserts into the cup on the steering gear I'm missing those two small square blocks that fit on the cross rod on the steering shaft. I've been through every bag and box of removed parts and can't find'm.
Anybody have some laying around they want to part with?
If my measurements are right they are (in inches) .65W x .65L x.6H and have a pocket centered to fit the cross rod. The rod for the pocket measures .4 diam x.4 deep. Probably need a couple 1/1000 to fit with grease in there. The outter edges are rounded where the base - the pocket side - are flat.
Thanks
Mudrat