Quote Originally Posted by CJ Shark
The Vette MC is good when you run 4 wheel disks as well. The primary & secoandarys are equal size so you can probably get by without the prop valve.

I had the vette MC and it worked ok, but I switched to a 70's Chev 1 ton mc. It has the same design (primary & secondary of equal size) But it moves allot more volume thus giving more stopping power.

I'll try and look up the part number for it.


But either one of those will work fine. I believe the Vette is the 1968 1 1/8 bore 4 wheel disk MC. Make sure its the 1 1/8 bore.
Sounds good. Let me know part numbers if you can. How is the mounting compared to the CJ. I just dropped a new Perpotioning valve in with new lines so just rather keep it there.

Thanks CJ

-RJ