Alright so i have a 360 out of my 77 chero, and im gonna swap it into my 85 CJ7, i was gonna swap the th400 in the chero to the CJ but dont want to spend the money to adapt it to the dana 300 in the CJ, so now im thinking of swapping in a 727 but the clocking is different on those if i'm not mistaken but has the same bolt pattern so how hard is it to re drill the t-case (because i dont want to spend the $$$ on a cloking plate) to mate with the 727? Are there any other good tranny's that will mate with the dana 300? and did any one run into any problems swapping in a 360, from what i've read its a pretty straightforward swap

Thanks

Josh