I just came into a new Comp Cam kit #CL10-201-4. It consists of both the cam and lifters - all new in the box. I like Reed cams so this one's gotta go! Make me an offer guys! Thanks, John
I just came into a new Comp Cam kit #CL10-201-4. It consists of both the cam and lifters - all new in the box. I like Reed cams so this one's gotta go! Make me an offer guys! Thanks, John
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,200-5,200 RPM
Duration at 050 inch Lift: 212 int./212 exh.
Advertised Duration: 260 int./260 exh.
Valve Lift with Factory Rocker Arm Ratio: 0.447 int./0.447 exh.
Lobe Separation (degrees): 110
Grind Number: 260H
1969 AMX
1967 Rambler Rogue
If you need a tool and don't buy it...
you'll eventually pay for it...
and not have it.
Henry Ford