AMC T-10

[JERSEYJOE]

Does anyone have an AMC T-10 laying around? I just need you to measure the diameter of the front bearing retainer. It will tell me the ID of the throwout bearing.

I am attempting to install an oddball transmission in my Jeep and I just found out that the standard Jeep throwout bearing has an ID of like 1.450 and the trans I have has a bearing retainer diameter of 1.350. The T-18 and the T-176 all have the same ID throwout bearing as far as I know. I think that the T-10 has a smaller one, like 1.350 cause the guy before me had this trans behind a 390.

BULLTEAR made me a slick pilot bearing that made this possible. Thanks guys!!! Now if I can only get this throw out bearing thing solved I can install the monster.

[BREK]

I called centerforce and they have 3 bearing options part#'s and id measurements are as follows.

N1439 1.446id

N1489 1.416id

N1491 1.318id

Hope this helps.

[JERSEYJOE]

yes it does. thanks