Results 1 to 5 of 5

Thread: T-18 Speedometer cable

  1. #1

    Join Date
    Sep 2005
    Location
    Bristow, Virginia
    Posts
    7

    T-18 Speedometer cable

    Question - I'm looking for a speedometer cable for my '77 J20 401 w/T-18 FSJ, can I use just about any Jeep CJ cable from around same model year, or will this not work..? Thanks - Steve
    No CJ's left. 1968 AMC = long term.

  2. #2
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,864
    If it's long enough, a CJ cable should work. The threaded ends are the same. I've got a CJ cable somewhere I can measure.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford

  3. #3

    Join Date
    Sep 2005
    Location
    Bristow, Virginia
    Posts
    7
    Thanks tufcj - Don't worry about measurement, I'm just going to pull my and go from there.

  4. #4
    Bulltear forum member Swabie
    Join Date
    Mar 2007
    Posts
    28
    If its too short look for a cable from a cj with automatic trans. They are longer.

  5. #5

    Join Date
    Jan 2006
    Location
    hickory, nc
    Posts
    242
    most flaps have a universal speedo drive cable that is really long. i'm pretty sure all mech. drives have a standard thread. just cut to length and crimp.
    mike

    bullets don't hurt, but the holes do.

    VOTE BUTTON

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad