Originally Posted by jeepsr4ever
Which other mods specifically ?
Originally Posted by jeepsr4ever
since AMC rods are fed AFTER the AMC mains -
and one reason people do not cross drill the mains is
because the rods are fed through the mains
and if you cant get oil to the rods you spin a bearing......
but you've rods 2,4,6&8 conceptually "somewhat starved
for oil during the power stroke, which probably is not desirable"........
how does one solve this AMC dilemma ?
Increasing the amount of oil delivered by the main galleries -
which could necessitate rifle drilling them out by how much safely ?
- and -
running a supplement oil line to the back of the block ?
might just add a can of STP and call it even =D>