Results 1 to 4 of 4

Thread: move PS pump

  1. #1

    Join Date
    Feb 2007
    Location
    DC suburbs
    Posts
    333

    move PS pump

    I despise how AMC put the PS pump at the highest possibly point on the motor. Is there any way to move it lower?

  2. #2
    Thank you from BT Tech Master Bulltear Forum
    Join Date
    Nov 2005
    Location
    Middle of the Iron Range MN
    Posts
    1,229
    build a bracket and mount it opposite the alternator and get a different belt. Might need new hoses too.

  3. #3
    Thank you from BT ULTIMUS MAXIMUS STATUS tufcj's Avatar
    Join Date
    Apr 2004
    Location
    Watkins, CO
    Posts
    2,864
    GM hangs theirs down low on the driver side. Maybe adapt SBC brackets. They use the same Saginaw pump with a different shaped reservoir. I kind of like mine up high, water is a very bad for a hydraulic system.

    Bob
    tufcj
    1969 AMX
    1967 Rambler Rogue

    If you need a tool and don't buy it...
    you'll eventually pay for it...
    and not have it.
    Henry Ford

  4. #4

    Join Date
    Feb 2007
    Location
    DC suburbs
    Posts
    333
    Quote Originally Posted by tufcj
    GM hangs theirs down low on the driver side. Maybe adapt SBC brackets. They use the same Saginaw pump with a different shaped reservoir. I kind of like mine up high, water is a very bad for a hydraulic system.

    Bob
    tufcj
    A full hydro steering should bee 100% waterproof and sealed. No worries about water. The problem is having a reservoir that's above the pump. I have a separate reservoir, and it's against the hood.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad