-
Thank you from BT
Junior wrench of the Forum
Spacers look ok find out after supercharger is in. I see the bracket that holds the water pump idle pully on needs some grinding for the lower radiator hose clearance, idle pully bolt cut on the back side also.
-
Thank you from BT
Junior wrench of the Forum
-
Thank you from BT
Junior wrench of the Forum
Happy day things look good supercharger pully shoud go back a little,called Vortech put on hold forver,hung up. Mechinc buddy come by tomorow look see. Power steering hose almost solved. The pressure fittings on the pumps are interchangeable ,makes it a lot easier to get one.
-
Thank you from BT
Junior wrench of the Forum
-
Thank you from BT
Junior wrench of the Forum
Still could not get alinement right , took it all apart again. Found that hump on the lower front of power steering pump barely toching the bracket. Ground a little off the bracket, thats history. Now I came to the conclusion that the two bolt holes for the long water pump bolts in bracket not alined to holes in water pump.Going to get friends for a second opinion.
-
Thank you from BT
Junior wrench of the Forum
-
Thank you from BT
Junior wrench of the Forum
The best day yet, opened up the bolt holes and Wow looks good maybe supercharger pully could go back a fraction ? But I think I will stop here, have to remake some water pump spacers.
-
Thank you from BT
Junior wrench of the Forum
-
Thank you from BT
Junior wrench of the Forum
Well AMC friends good day here ,work on it tomorow, lucky I'm retired.
-
Thank you from BT
Junior wrench of the Forum
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules