ok lets post this one time sticky area for anyone needing driveshafts, that way we have a collection and i/others can dig for spares
ok lets post this one time sticky area for anyone needing driveshafts, that way we have a collection and i/others can dig for spares
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
YJ front stock length or for a 2.5" lift, I-6, 5 Speed, D30 and NP231.
MC have you had time to look and see if you had one laying around yet? From what I am reading it will have a collapsed length of 40" and a running length of 41.5"
i sent you spec a while back for a cv unit lol
best ever 11.669 @ 112.33 mph in 1/4 mile on 33 x 10.50 slicks and 4" lift / 7.358 @ 93.03 mph in the 1/8 mile
I don't recall getting that. :(Originally Posted by fuzz401
What year, model, make cv shafts will work with a lifted CJ and YJ? Need both for ht CJ and the front for the YJ,
I've heard the Waggies will work, how about Cherokees? any other FSJ CV shafts???
Mudrat
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
FSJ's with quadratack have cv front driveshafts, you will need a larger cv style yoke for your dana 300 though
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Yup, my buddy ran into that problem when he did his spring over on 4" leaves. Picked up some Tom Woods CV shafts and forgot to get the yolks for his dana 300. Boy was he upset that he had to wait on even MORE parts! Anybody carry these on here, I am gonna eventually need 2 of them for the front and rear of my 300.
Jack
Important tip there on the T-case yokes - thanks. So the shafts out of any QT FSJ ... hummmm ... have to see if my guy has any available
Mud
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
Only the front is a CV shaft if I am not mistaken. My CJ7 with a Qtrack also had a CV front shaft, but for lifting a vehicle, you can't just cut it down and run it, you need a longer tube. That's why the FSJ one is worth more. I've seen a couple at UWI almost everytiem I've been over there, so let me know and I can keep an eye out for ya.
Jack