69 disc brake upgrade question.
I wish to upgrade the disc brake set-up that is on my 69 SC/Rambler. A few years back I pulled the set-up from a donor car. And now looking at my car there is one piece that I did not take from the donor car and I am hoping to confirm here that my existing 69 piece will work with the newer stuff.
The piece in question (I don’t know what its called) is bolted to the backside of the steering knuckle by two bolts diagonally and goes to the outer tie rod end.
At the time I probably thought that that piece should probably stay original.
Is that the case? Will that piece still bolt correctly to the back side of the new stuff?
Thanks, Norm.