I HAVE A 401 0.30 VENIOLA FLAT TOP PISTONS,COMP 280 MAGNUM CAM,
319 HEADS,DUI HEI DISTRIBTOR,EDELBROCK AIR GAP AND 800 PERFORMER CARB,WHAT SHOULD I SET THE TIMING AT 10 DEGREES?
MARK
I HAVE A 401 0.30 VENIOLA FLAT TOP PISTONS,COMP 280 MAGNUM CAM,
319 HEADS,DUI HEI DISTRIBTOR,EDELBROCK AIR GAP AND 800 PERFORMER CARB,WHAT SHOULD I SET THE TIMING AT 10 DEGREES?
MARK
Hey Mark,
Let me know what you think of the DUI. As for the timing, sorry, I am not much help there, I just use the simple Edelbrock cam and timing chain setup - it's already marked.
Jack
JACK,Originally Posted by Lifted79CJ7
I HAVE A DUI HEI DISTRIBOTOR IT WORKS GREAT,
I ALSO HAVE A PROFORM HEI I PURCHASED OFF OF EBAY IT WORKS GREAT TO, BOTH ARE ONE WIRE HOOKUP.
I WAS TRYING TO TO FIND SOMEONE WITH A 401 BUILT CLOSE TO MINE TO SEE WHAT THEY ARE SETTING THERE TIMING WHERE IT RUNS THE BEST.
MARK
Hehehehehe cut off 2 cyl, line'm up and set it at 12 degreesOriginally Posted by MADMAX401
I've got the I-6 with HEI and I finnally got mine going at +8 TDC and tweaked to about 12. For the V-8's don't have one yet, but I'll keep watching to see what you wind up with.
pat
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE